301 Use mode of the metal plate rolling forming machine - China Roll Forming Machine, Steel Water Tank Machine, Steel Silo Rollformer, Suppliers, Manufacturers, Factory - J&R
news

Use mode of the metal plate rolling forming machine

2024-11-02

Metal plate rolling forming machine is mainly used for rolling forming processing, with simple operation and high efficiency. The following is the basic use of the machine.

First, ensure that all the parts of the metal plate rolling forming machine are complete without damage, and check whether the power line is safe and reliable. Then, adjust the roller clearance and the roller speed according to the thickness and width of the required metal plate.

Place the metal sheet at the feed inlet, open the machine, and allow the sheet to enter slowly. Through the button on the control panel, adjust the pressure of the roller, make the plate gradually deformation, to achieve the desired molding effect. In the process of rolling, we should always pay attention to the running state of the plate to avoid wrinkles or fractures.

When the metal plate will be exported from the outlet, the machine should be closed immediately and the forming plate should be removed. Check the molding quality, if it does not meet the requirements, readjust the roller clearance and pressure until satisfactory results.

When using the metal plate rolling forming machine, the following points should be noted: first, to ensure that the operator has certain operation skills and safety awareness; second, to wear protective glasses and gloves during the operation to prevent accidental injuries; third, to maintain and maintain the machine regularly to ensure its normal operation.

In short, the use of metal plate rolling molding machine is simple, only need to adjust the clearance and pressure of the roller, pay attention to the safety of operation method, can efficiently complete the molding processing of metal plate.