As an important equipment in modern industrial production, the correct and safe use of the forming machine is crucial. Here are some key matters about the use of steel coil forming machines:
1. Preparation before the operation
Before operating the steel coil forming machine, you must be familiar with the operation manual of the equipment, and understand the structure, performance and operation method of the equipment. At the same time, the electrical equipment, hydraulic system and air circuit system of the equipment should be checked to ensure the normal operation of all parts to prevent failure or danger.
2. Notes for the operation process
The operation shall be conducted by special personnel to ensure the orderly operation. The host operator must master the operation sequence and adjust the repair value of the error in time to ensure the molding quality.
When hoisting the steel coil, the operation should be strictly in accordance with the hoisting specifications to provide necessary protection for the steel coil. The steel coil must be tightened on the rolling frame, and the brake should be properly adjusted, and supervised by special personnel to prevent the steel coil from slipping or damaging.
During the operation process, we should pay attention to the forming situation and the surface finish of the plate material at any time. If any abnormal situation is found, it should be stopped in time to avoid equipment damage or product quality problems.
When adjusting the gap between the upper and lower rolls, the standard thickness ruler should be used. Do not use other tools to adjust, to avoid damage to the equipment or affect the forming effect.
3. Safe operation specification
During the operation, it should be kept away from the moving path of the equipment to prevent dangerous accidents.
Not allowed to wear gloves when delivering materials to prevent damage caused by hands being involved in the equipment.
When handling the formed steel coil, wear gloves to protect it to prevent hand injury. At the same time, when hoisting and forming the steel coil, it should be protected to prevent the steel wire rope from injuring the steel coil.
Regular maintenance and inspection of equipment to ensure good operation of equipment parts.