Description
Description
Introduction:
steel fence roll forming machine can be used to produce strong and durable steel fences. Our steel fence roll forming machine uses advanced technology and precision engineering to manufacture perfectly shaped steel fence components. Meet the high requirements for highway fence safety and provide strong, reliable, beautiful and durable fence products.
Advantage:
1. The production is versatile and can produce various styles of fences, including picket fences, chain link fences, etc. They can also custom produce fences in different heights, widths and designs.
2. High production efficiency. Large quantities of fence components can be produced in a short period of time, which can help you meet production quotas.
3. High cost-effectiveness. Low maintenance costs and long service life.
Thickness:0.4-0.6mm
Material: Mild steel
Working flow:
Manual de-coiler---- Roll forming---- Hydraulic cutting----Run-out table
Technical details:
1 |
Material thickness |
0.4-0.6mm |
2 |
Raw material |
Galvanized Sheet |
3 |
Material Width |
485mm |
4 |
Forming Stations |
21 stations |
5 |
Forming Speed |
0-17M/Min |
6 |
Main Power |
7.5KW |
7 |
Hydraulic Power |
3KW |
8 |
Power Source |
415V/50HZ/3PH or as per your requirement |
9 |
Machine Size |
12*0.6*1.5 |
10 |
Shaft Diameter |
75mm |
11 |
Driven by |
1’’ Chian |
12 |
Way of control |
By PLC Panasonic or Mitsubishi |
13 |
Tolerance |
Total Length: 3m±1mm |
14 |
Roller Material |
45# Steel |
15 |
Machine Frame |
80x80 Square Steel |
Components details:
1)3.5T Manual De-coiler
1.Maximum capacity: 5 tons
2.Maximum width: 1250mm
3.Inner diameter: 500mm
4.Way of expansion: Manual
5.Way of de-coiling: Passive
2) Main roll forming machine
1.Matching material: Mild steel thickness is 0.4-0.6mm
2.Stations: 21stations
3.Material of the rollers: 45# steel heat treatment, with chrome treatment.
4.Material of the shaft: 45#steel Quenching and tempering treatment, hardness HRC 48-52
5.Main motor power: 7.5 KW motor with hardened reducer
6.Hydraulic cutting station power: 3KW
7.Line speed: Upright:0-17 m/min(Including punching and cutting time
8.Voltage:415V/50Hz/3phase(very important)
9.Total Weight: 5 tons
10.Transmission:1.0inch chain
11. Side plate: 18mm Wall type
3) Hydraulic cutting system
1.Hydraulic station power: 3KW
2.Length tolerance: 3m±1mm
3.Cutting blade:Cr12Mov
4) PLC control system
1.Brand for the control cabinet:
Inverter |
Yaskawa |
This whole machine is provided by the professional company in Wuxi, and this system is security and reliable.
|
PLC |
Panasonic |
|
Encoder |
Omron |
|
Touch screen |
MCGS |
|
Servo control PLC |
Mitsubishi |
|
Other electrical appliances |
Schneider |
2. There will be emergency button on the control panel, once emergency issue happens, press the button, then all the line will be stopped. It’ll protect the users’ safety.
5) Receiving platform
1.Way of drive:passive
2. Length: 2 meters
3. Quantity: 3 sets
6) Hydraulic station
1. Power:3KW for cutting
2. Solenoid valve: Huade
3. oil for the tank: 46# Hydraulic oil
Specific parameters of equipment
(1)Voltage, Frequency, Phase: 415 V, 50 Hz, 3Phase
(2)Automatic length measurement
(3)Automatic quantity measurement
(4)Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)Length inaccuracy can be amended easily
(6) Control panel: Button-type switch and touch screen
(7)Unit of length: millimeter (switched on the control panel)
Packing details:
No |
Name |
Quantity |
Note |
1 |
5 tons Manual de-coiler |
1 set |
|
2 |
Main roll forming machine |
1 set |
|
3 |
Hydraulic station |
1 set |
|
4 |
Receiving platform |
32 sets |
|
5 |
PLC control cabinet |
1 set |
|
6 |
Tools and spare parts |
1 set |
|